calibration gases search image Specialty Gas Banner image

Quality calibration gases image

It is the guiding principle of MESA Specialty Gas and equipment to offer only the highest quality calibration gas products  to our customers.

calibration service image

We recognize that only excellent customer service will allow our growth in this highly competitive calibration gas industry.

Technical support image

MESA Specialty Gas offers technical support through top experts in the field.  Let us know how we can assist you.

 
 
Long Spec gas top image

 
 Product Specifications

MESA Specialty Gases offers three types of product grade available for your calibration gas standard, Primary, Certified and Gravimetric Standards.

The Primary Standard is the most accurate and is made by weight. Unless stated otherwise, the specialty gas mixture is certified to ± 1% analytical accuracy of the numbers reported.

The Certified Standard is made by a combination of pressure and/or weight measurements. Unless stated otherwise, the calibration gas mixture is certified to ± 2% analytical accuracy of the numbers reported.

In the case of all specialty gas products, final calibration gas mixtures are analyzed by gas chromatography or other suitable analytical methodology to confirm they are within the allowed tolerances. All calibration gas mixtures are supplied with a "Certificate of Analysis" that details the requested and analytical values as well as preparative and analytical methods used by MESA Specialty Gases to prepare the calibration gas standard.
 

STANDARD SPECIFICATIONS FOR CALIBRATION GAS, SPECIALTY GAS, NATURAL GAS, PETROCHEMICAL AND REFINERY GAS STANDARDS

Product Grade Blend Tolerance Blend Tolerance (1) Certification Accuracy (1)
Primary   Below 5 ppm (2)   ±10 to 15%   ±1 to 2%
    5-100 ppm   ±5%   ±1%
  101-5000 ppm   ±5%   ±1%
  Above 0.5%   ±5%   ±1% (1)
Certified   Below 5 ppm (2)   ±15-20%   ±2-5%
    5-100 ppm   ±10%   ±2%
  101-5000 ppm   ±10%   ±2%
  Above 0.5%   ±5%   ±2%
Gravimetric (3)   0-100 ppm   ±20% Non-Certified by independent laboratory analysis. Concentration Ranges are reported based on the gravimetric values.
    101-5000 ppm   ±10%
  Above 0.5%   ±5%

 

  1. The Blend Tolerances and Certification Accuracy are expressed as the relative percentage deviation from the requested concentration of the individual components. Certification Accuracy for Primary Standards over 2% concentration will be ± 0.02% absolute of the reported value.
  2. Tolerances of minor components below 5ppm may vary depending on the component and the complexity of the mixture.
  3. Each component is reported at the requested concentration ± the % stated for the concentration range.
Long Spec gas bottom image


Company Information :: Petrochemical and Refinery Calibration Gas Standards :: Environmental and EPA Protocol Gas Standards ::
Health and Hygiene Calibration Gas Standards :: Instrument Grade Pure Gas ::
Specialty Gas regulators

e-mail: mail@mesagas.com

Copyright 1993-2009 ©MESA Specialty Gas -- All rights reserved.
MESA Specialty Gas & Equipment a Division of MESA International Technologies, Inc.
2427 South Anne Street
Santa Ana, CA 92704
Toll-Free: (866) 470-MESA (6372)
Tel: (714) 434-7102; Fax (714) 434-8006
 

Blue bottom image