Gas Regulator, Preset Flow Regulators, Ammonia, Hydrogen Sulfide, Nitric Oxide Gas Regulator

MESA 600 Series
58/103L Preset Flow Regulator

Recommended Applications

The 600 Series regulator is for use with MESA's 58L, 103L and 104L Cylinders. They can also be used on conventional high pressure cylinders and lecture bottles. These regulators are recommended for both non-corrosive and corrosive gas service including Ammonia, Hydrogen Sulfide, Nitric Oxide and Sulfur Dioxide standards.

Description

The 600 Series regulator is a single stage piston style regulator. All wetted parts of the regulator are either aluminum or stainless steel. The regulator has 8 switch selectable flow settings ranging from 0.2 to 6 liters per minute. It is available with either a brass or stainless steel gauge and various CGA connections.

Available Models

Part Number	Gauge (psig)	Inlet
610-CGA	0-3,000	Brass CGA
620-CGA	0-3,000 SS	SS CGA
610-CGA-BRC10	0-1,000 Brass	Brass C-10
620-SSC10	0-1,000 SS	SS C-10

NOTE: C-10 is same as 5/8"- 18UNF

Standard Materials

Body	Aluminum
Spring Housing	Aluminum
Cap	Aluminum
Nozzle	Aluminum
Seal	Viton
Seat	Kel-F 50 Micron
Inlet Filter	Stainless Steel

Standard Specifications

Maximum Inlet	2,00 psig
Temperature Range	0^o to 140^o F
Flow Settings	0.2, 0.3, 0.5, 1.0, 1.5, 2.5, 5.0, 6.0
Outlet Connection	3/16" Hose Barb

Go to the top of the page

Company Information	ISO 9001:2000 Information	Typical Mixture Components
Cylinder Specifications	Product Specifications	Material Safety Data Sheets

MESA Specialty Gas-Company Information :: Petrochemical and Refinery Calibration Gas Standards :: Environmental and EPA Protocol Gas Standards ::
Health and Hygiene Calibration Gas Standards :: Instrument Grade Pure Gas :: Specialty Gas regulators

E-mail: mail@mesagas.com